Features:
These aluminum enclosures protect electronic controls and instruments
from all forms of outdoor natural elements, including rain, sleet, and snow, as
well as seepage and splash. They are U.L. listed and can be painted per customer requirements.
Enclosure
Completely fabricated from .125"-thick type 5052-H32, Vinyl-coated, mill finished aluminum utilizing intermittently welded construction, subsequently weatherproofed with silicone sealant.
Internal attaching components include four adjust-able "C" mounting channels. Two slotted rails on rear wall for attaching equipment panels.
Door opening single-flanged on the sides and bottom, and double-flanged on top to prevent water drops when the door is open. Opening includes a mount for two door-operated switches.
Thermo convection air ventilation system utilized with provisions for mounting fan for forced-air cooling. Exhaust outlet openings provided under the roof over-hang.
All internal and external hardware utilize non-corrosive material.
Adjustable 3/8"-diameter stainless steel door stop can be latched in various positions.
Two (2) shelves included.
Door
Provided with three-point locking mechanism
(with duplex nylon rollers top and bottom size 4).
3/4"-diameter stainless steel handle with provisions for padlocking.
Main door lock - industrial standard pin tumbler lock with #2 key.
Louvered inlet with filter to prevent dirt from entering with air flow.
Closed-cell neoprene door seal gasket.
Heavy gauge aluminum butt hinge utilizing a
non-removable 3/16"-diameter stainless steel hinge. Carriage bolted in place for ease of door removal.
2"-deep, fabricated switch compartment included with standard "police" lock and 14-gauge stainless steel continuous hinge with 3/32"-diameter hinge
pin riveted in place. Compartment mounted flush
to the door.
