TRAFFIC & PARKING CONTROL CO., Inc.        1.800.236.0112
Homepage

 

 
SIG Polycarbonate Signals
pdf pages 8-11
Search this site
TOP TOC INDEX
SIG Polycarbonate Signals from TAPCO

Features:

  • LED-Ready
  • Meets or exceeds ITE specifications.
  • Design provides minimum weight but maximum rigidity and strength.

Material - The housing door, and visor are injection molded of 0.156" thick ultraviolet stabilized, pre-colored opaque polycarbonate - no peeling, no corrosion, and scratches will not show.

Housing - One-piece unit has serrations in 5° increments at each end. Each housing has provisions for mounting two terminal blocks and attaching backplates. Housings may be fastened together to make multi-section signals. The 9" and 12" housings can be intermixed to form combination signals.

Door - Two stainless steel captive eyebolts and wing nuts permit easy access to the inside of the housing. Hinge pins are stainless steel.

Visor - The removable twist-on visor is secured to the door with stainless steel hardware. Cut-away or tunnel visors are available.

* Incandescent applications only.

Reflector* - A separately hinged, ALZAK® reflector is standard. Glass is also available.

Lens* - Conforms to ITE specifications. The standard lens is polycarbonate, capable of withstanding illumination by a standard traffic signal lamp without physical distortion. A glass lens is also available.

Gaskets* - A molded one piece lens gasket is used to seal the lens to the reflector assembly and door to form a sealed unit. A second gasket between the door and housing assures the weather tight quality of the unit.

Lamp Socket* - Insulated, pre-focused, and maybe be rotated for positioning the lamp filament without using tools.

Positive Positioning - Positive positioning and locking is achieved through the use of serrated brackets, mast arm, or span wire fittings.

The standard signal is composed of three injections molded polycarbonate body sections containing the optical unit, lens, door and visor. The basic construction design provides minimum weight combined with maximum rigidity and strength. Coloring is molded in all the way through: therefore, there is no peeling, no corrosion, and scratches will not show.It meets or exceeds ITS specifications.

* Terminal blocks- a four position spade type terminal block is standard.
A four position kliptite terminal block is an option.


Visor Housing and door Color Visor Color
-X Color -X Color
01 Red 03 Black
02 Yellow 04 Yellow
03 Black 05 Green
TOP TOC INDEX
SIG Polycarbonate Signals from TAPCO
Enlarge		 SIG Polycarbonate Signals from TAPCO
Enlarge
Weights 8" (200mm) 12" (300mm)
Single sections with visor (approx.) 5 lbs. (2.27 kg) 8 lbs (3.63kg)
Housing 2 lbs. 0. 4oz (.92kg.) 3 lbs. 1oz (1.37kg)
Door 10.2 oz (.29kg) 1 lb. 1.7 oz. (.50kg)
Ring 3.5 oz (.10kg) 6.6 oz (.19kg)

Incandescent Assembly
(see table below reference numbers)

SIG Polycarbonate Signals from TAPCO
Enlarge

 

Standard Head Assembly
(see table below reference numbers)

EnlargeSIG Polycarbonate Signals from TAPCO

LED Assembly
(see table below reference numbers)
SIG Polycarbonate Signals from TAPCO
TOP TOC INDEX
Reference#
Description
 Incandescent Applications LED Applications
8" (200mm) 12" (300mm) 8" (200mm) 12" (300mm)
2 Carriage bolt (1/4-20 x 1-3/4") A701101 A701101 A701101 A701101
3 Clamping washer M3417 M3417 M3417 M3417
4 Hex nut (1/4-20) M30221 M30221 M30221 M30221
5 Type 2 groove pin, SS (8"-3/16" x 1") A844030 N/A A844030 N/A
Type 2 groove pin SS (12" - 3/16"x 13/16") N/A A702181 N/A A70181
6 Hinge pin (flared spiral in) A701392 A701392 A701392 A701392
7 Spiral pin, SS (3/16" x 1") A144006 A144006 A144006 A144006
8 Wingnut eyebolt assy. A844263 A844263 A844263 A844263
9 Socket holder wire (bail) A701862 A844263 N/A N/A
Bail wire spring A844337 A844337 N/A N/A
10 Socket with brass screw shell A702029 A702029 N/A N/A
11 Lead assy. w/spade lugs, red A844252 A844252 N/A N/A
Lead assy. w/spade lugs, yellow A844251 A844251 N/A N/A
Lead assy. w/spade lugs, green A844250 A844250 N/A N/A
12 Socket gasket A844249 A844249 N/A N/A
13 Reflector (Alzak) A833245 A844325 N/A N/A
14 Reflector gasket (Alzak) A844246 A844326 N/A N/A
15 Die cast reflector ring A702159 A702158 N/A N/A
16 Reflector ring spring A702182 A702274 N/A N/A
17 Lens, poly - red PBL240 PBL246 N/A N/A
Lens, poly - yellow PBL241 PBL248 N/A N/A
Lens, poly - green PBL239 PBL247 N/A N/A
18 Lens arrow mask N/A PBL286 N/A N/A
20 Lens gasket A844248 A844328 N/A N/A
21 Lens clip, generic A84436155 A84436155 N/A N/A
22 Lens clip screw, SS (10x 3/8") 0135021 0135021 N/A N/A
23 Door gasket A701630 A701630 A701630 A701630
24 Signal door A700228-XX A700230-XX A700228-XX A700230-XX
25 Visor - tunnel A700119 A700120 A700119 A700120
Visor - cutaway A700468 A700469 A700468 A700469
26 Visor screw, SS (10-32x 3/9") 0135021 0135021 0135021 0135021
27 Terminal block, 4 pos. spade type* A182944 A182944 A182944 A182944
28 LED bulb - red N/A N/A 220-24 220-5
LED bulb - yellow N/A N/A 220-16 220-10
LED bulb - green N/A N/A 220-22 220-19
LED arrow bulb - red N/A N/A N/A 220-18
LED arrow bulb - yellow N/A N/A N/A 220-14
LED arrow bulb - green N/A N/A N/A 220-17
*Terminal blocks - A four position spade type terminal block standard.
A four position kliptite and a six position spade type are options.
           
TOP TOC INDEX

TRAFFIC AND PARKING CONTROL CO., INC.
5100 W. BROWN DEER ROAD, BROWN DEER WI
PHONE: 262-814-7000 FAX:414-354-5480 TOLL FREE: 1-800-236-0112 TOLL FREE FAX: 1-800-444-0331
Copyright © 2010
TAPCO