| SPECTRA IIIT™ SE Series Dome Systems |
Enlarge
Pendant Model
|
Premier Integrated Dome System
Spectra III SE features multiple back box configurations and three auto focus, high-resolution dome drives with programmable software.
Spectra III SE dome drives feature LowLight™
Technology. The day/night model features a 23X lens, built-in motion detection and 80X wide dynamic range imager. Two standard cameras, available in color or black-white, with a 22X lens and Exview HAD™ imager for increased sensitivity. |
Features
- Built-in Back Box Memory
- Camera Title Overlay, 20 User-Definable Characters
- Horizontal and Zone Blanking
- RJ-45 Data Port for Software Update and Setup
- On-Screen Compass and Tilt Display
- Multi-language On-Screen Menus
- Password Protection
- Freeze Frame During Presets
- 7 Alarm Inputs; 2 Programmable Auxiliary Outputs
- Built-in Surge and Limited Lightning Protection
- Heavy-Duty and Stainless Steel Models Available
Standard and Environmental Pendant
- Standard and Environmental Models
- Built-in Memory Stores Camera/Dome Settings
- Standard Pendant Available in Black or Gray Finish; Environmental Pendant Gray Finish Only
- Quick Disconnect to Dome Drive
- Meets NEMA Type 4X, IP66 Standards
- Aluminum Construction
- 5.9-Inch Acrylic Bubble
- Environmental Model
Includes Sun Shield,
Fan, and Heater
- Part Number 2690-1 Camera Only
- Part Number 2690-1423 Kit
|
Enlarge |
KBD300A Keyboard Controller
This password protected controller creates and recalls pan/tilt/zoom patterns and zones for the dome camera. In addition, complete control of functions such as forward/reverse camera sequences, initiating sequences and selecting preset camera positions can easily be selected.
|
| NET300
IT Network Video Transmission |
Enlarge
NET300
|
The NET300 can be used in three ways:
- Standalone – as a transmitter or receiver for a camera where BNC cable is not possible. This allows one-way video transmission for fixed cameras or the option
of sending control signals to a Spectra® dome or
Esprit® positioning system
|
-
Analog to Ethernet “Bridge” – as a way of using one or more NET300s connected to a system of Pelco matrices or Genex® multiplexers to view video from a vast number of camera analog inputs. In this application the analog device is being used as a “concentrator” to allow viewing of hundreds of cameras without incurring the cost of hundreds of encoders.
-
Complete Ethernet System – as a way of controlling an
unlimited number of cameras via NET300s by using Pelco’s VMX series of matrix control software in a purely Ethernet or hybrid system. Ethernet systems involve using an encoder with each camera and using the Ethernet as a virtual matrix. This is cost efficient for new installations or add-ons to existing installations. Using the VMX300 as control software for existing systems as well as new Ethernet portions allows the user to build the industry’s only truly “hybrid” CCTV system
The NET300 can display video on a PC using Internet Explorer®, an analog monitor, or both.
PelcoNet™ transmits (NET300T) or receives (NET300R) live video and data across existing Ethernet networks. Sending video over computer networks yields significant cost savings by using an existing computer network to monitor a remote site.
The NET300 saves installation costs (no separate cabling required), allows toll-free operation (intranets), and saves management costs (single, uniform network).
With minimal setup, the NET300 transmission system can be installed and running in minutes.
The NET300T, featuring dual MPEG-4 video streams, lets you use computer networks to interface your control and monitoring stations with remote camera sites, whether they are in the same building, across the country, or around the world.
Features
- Send and Receive Live Video and Control Data Over Ethernet Networks
- Dual MPEG-4 Video Streams
- Full Integration with Pelco’s Matrices, Genex® Multiplexers, Spectra® Domes, and Esprit® Positioning Systems
- Adjustable Bandwidth, Image Rate, and Quality
- View Video on PC, Analog Monitor, or Both
- NTSC and PAL
- Alarm Input and Relay Output
- Bidirectional Data Channel Via RS-232/422/485
Serial Port
- Part Number 2690-NET300R
- Part Number 2690-NET300T
|
| 300 Series Flat Panel,
TFT LCD Monitor |
Enlarge
|
15-Inch, 17-Inch, 19-Inch Monitors with Multimode Functionality
These 15, 17 and 19-inch monitors have a color LCD panel with a thin film transfer (TFT) active matrix. The monitors automatically adapt to the appropriate input resolution (up to 1280 x 1024).
The 300 Series features a folding picture-frame-style desktop stand, optional rack mount kits, and VESA® -compliant mounting holes to easily adapt to different wall and ceiling mounts.
|
These monitors automatically detect and display the correct video format (NTSC or PAL) and are powered by an internal autoranging power supply.
The 300 Series uses four long life CCFT (cold cathode fluorescent tube) backlights to maintain the brightness level over time, eliminating the brightness degradation common in aging CRT monitors.
Adjustments of standard monitor display parameters are made via user-friendly, on-screen menus and front panel controls.
Features
- Space-Saving, Flat Panel Design
- Picture-Frame-Style Desktop Stand
- Looping Composite and S-Video Inputs
- VGA Input
- Supports up to 1280 x 1024 SXGA Resolution (PMCL319, PMCL317), 1024 x 768 Resolution (PMCL315)
- Maximum Brightness of 380 cd/m2 (PMCL319),
400 cd/m2 (PMCL317), 350 cd/m2 (PMCL315)
- Maximum Contrast Ratio of 500:1
- Maximum Response Time of 12 ms (PMCL319, PMCL317), 16 ms (PMCL315)
- 100/240 VAC, 60/50 Hz Autoranging Internal
Power Supply
- Low Power Consumption (<50 Watts)
- Internal Speakers
- Optional Rack, Wall, Ceiling, and Camera Mounts
ELECTRICAL
- Input Voltage 100-240 VAC, 50/60 Hz,
internal power supply
- Power Consumption <50 W (on), <5 W (standby)
PHYSICAL
Unit Weight
- PMCL315 9.6 lb (4.4 kg)
- PMCL317 12.4 lb (5.6 kg)
- PMCL319 14.5 lb (6.6 kg)
ENVIRONMENTAL
- Operating Temperature 32° to 104°F (0° to 40°C)
- Storage Temperature -4° to 140°F (-20° to 60°C)
- Part Number 2690-PMCL315 - 15"
- Part Number 2690-PMCL317 - 17"
- Part Number 2690-PMCL319 - 19"
|
| Mounts for PMCL Series Monitor |
Enlarge
PMCL-WMT
Enlarge
PMCL-WMT
Enlarge
PMCL-WM2A
|
The PMCL-WMT can be swiveled 360 degrees to allow you to use the monitor in either landscape or portrait view. The head also tilts 35 degrees up or down for best viewing angle.
The PMCL-WM1A and the PMCL-WM2A, are equipped with convenient swing arms. The PMCL-WM1A is a single-arm wall mount, while the PMCL-WM2A is a dual-arm wall mount that can be folded flush against a wall. These mounts can also be swiveled 360 degrees for portrait or landscape viewing, and they can be tilted 35 degrees up or down.
Features
- For Use with VESA Compliant Monitors
- Rack Mounts for All 200/300/400 Series LCD Monitors
- VESA Compliant Wall and Ceiling Mounts
- Can Be Used With Pelco Series LCD Monitors
- Single or Dual Swing-Arm Wall Mount
- Universal Camera Mount for Public View Applications
- Unique Tilt/Swivel Head Design Ensures Optimum Viewing Angle
- Easy to Install
- Aluminum Construction
- For Indoor Applications Only
- Part Number 2690-PMCL-WMT
- Part Number 2690-PMCL-WM1A
- Part Number 2690-PMCL-WM2A
|
| SWM Series Pole Mount |
Enlarge
|
Features
- Low Cost
- For Use with Spectra® or
DF5 Series Pendant Domes
- Constructed of Cast
Aluminum
- Cable Feed-through Features
- Supports up to 10 pounds (4.5 kg)
- Easy to Install, by means of a Mounting Plate,
with Standard Tools
- Mounting Hardware is Concealed Within the SWM, Providing a Very Attractive Appearance
- Part Number 2690-2 Wall Mount (not shown)
- Part Number 2690-3 Pole Adapter
|
TRAFFIC AND PARKING CONTROL CO., INC.
5100 W. BROWN DEER ROAD, BROWN DEER WI
PHONE: 262-814-7000 FAX:414-354-5480 TOLL FREE: 1-800-236-0112
TOLL FREE FAX: 1-800-444-0331
Copyright © 2010
TAPCO |
